The working principle of spraying and baking paint room:
Run the spraying room using the air supply and exhaust way. When painting the blower and the exhaust fan start at the same time (if the winter need to improve the operating environment temperature, heating system also started). The outdoor fresh air from an air inlet through the air inlet filter level into the purification, heating the air from the blower unit; then the air processed to give a static pressure chamber painting rooms, room at the bottom of the filter pressure airflow pressure, solid block dust; after filtration is uniform with the speed of the wind laminar flow into the spray room, formed by the breeze airflow around the workpiece and the operation of the workers, the paint spray produced when the remaining paint mist and with the air, not around to dispersion, to protect the labor safety. The indoor load average wind speed is O.3 ~ O.5 M / sec. In order to airflow, paint mist containing air through the exhaust grille light into the trench, most of the paint mist around the grille below the trench baffle by reason of paint mist particles with the air suddenly refraction of inertia and settlement on the folded plate, tiny paint mist particles remaining with the gas flow again after the paint mist filtering the cotton baffle on the remaining paint mist particle filter, air purified by explosion-proof exhaust fan to outside air. Paint mist purifying efficiency higher than 95%.
When the need for drying the workpiece, heating air supply system can be designed with air circulation heating, heating air circulation and surface of spray paint room constantly, to ensure the workpiece surface paint film drying room.
Technical characteristics:
It is the light steel structure design, room safe;
The wall is composite insulation board sealing, beautiful appearance, convenient construction;
The energy saving explosion-proof lighting;
The constant temperature air in winter when painting
The exhaust purification spray paint mist
The automatic control of the paint drying
Automatic monitoring, control and alarm the combustible gas in the room spray
The spray drying and switching function
Air pressure monitoring and alarm the air supply and exhaust system
The workpiece heating and drying a variety of ways: electricity, fuel, gas, steam, etc.
The painting within a configurable 3D working trolley, convenient large workpiece painting work;
The work area is in line with the labor safety and health standards, emissions meet the national emission standards for environmental protection;
It is used for drying when spraying room is arranged in the exhaust gas concentration alarm device, exhaust gas concentration reaches a dangerous value exhaust system will automatically start promptly exhaust gas to the outside, which can effectively avoid the occurrence of dangerous situation